Glowboard: 휴대폰을 LED 전광판으로 바꾸는 배너 스크롤러

Glowboard 앱 아이콘 글 NAXTECH 팀 · 2026년 7월 1일 발행 · 2026년 9월 17일 업데이트 · v1.0 실사용
Glowboard LED 배너 스크롤러 — 안드로이드 휴대폰 화면에 밝은 앰버색 메시지가 흐르는 모습
Glowboard는 평범한 안드로이드 휴대폰을 콘서트·마중·파티용 LED 전광판으로 바꿔 줍니다.

한눈에 보는 Glowboard

무엇인가요
휴대폰 화면을 빛나는 사인으로 바꾸는 LED 배너 스크롤러입니다.
플랫폼
안드로이드 · 완전 오프라인 작동, 계정 불필요.
가격
광고 포함 무료, 선택형 PRO(평생 또는 연간).
주요 모드
스크롤 배너 · 응원봉 · 비트 싱크 · 멀티폰 사인 · 공항 마중 · 카운트다운·시계.
폰트
라틴·태국어·일본어·한국어·중국어 등 20종의 디스플레이 폰트.
이런 순간에
콘서트, 아이돌 응원, 공항 마중, 경기 날, 생일 파티.

조명이 꺼지고, 맨 뒷줄에서도 최애에게 두 글자를 보여 주고 싶은데 손에 쥔 건 휴대폰 하나뿐입니다. 휴대폰 화면과 진짜 빛나는 사인 사이의 그 간극을 메우려고 만든 앱이 바로 Glowboard입니다.

Glowboard는 LED 배너 스크롤러입니다. 메시지를 입력하고 스타일을 고르면 화면이 밝게 빛나는 사인으로 바뀌어, 공연장 맨 뒷줄에서도 입국장 건너편에서도 또렷하게 읽힙니다. 모든 처리가 기기 안에서 이루어지고 계정도 연결도 필요 없어, 결정적인 순간에 바로 꺼내 들 수 있습니다.

진짜 LED 패널처럼 만든 배너 편집기

메시지를 입력하면 Glowboard가 글자마다 은은한 글로우와 LED 도트 격자로 실제 전광판처럼 그려 냅니다. 20종의 디스플레이 폰트는 스크립트별로 묶여 있어 한글은 블랙 한 산스, 도현, 주아, 감자꽃 같은 한국어 전용 폰트가 자동으로 어울립니다. 흐름 방향(왼쪽·오른쪽·위·정지)을 고르고 속도를 1(읽기 쉽게)부터 10(경기장 빠르게)까지 조절한 뒤, 깜빡임, 자동차 앞유리를 통해 바로 읽히는 거울 텍스트, 외곽선, 그림자, 무지개 순환, 그러데이션 채우기를 더할 수 있습니다. 텍스트 색상 8가지, 배경 8가지, 그러데이션 8가지, 빛나는 LED 스티커 12종, 기호 18개를 메시지에 바로 넣을 수 있습니다.

Glowboard 편집기 — 라이브 배너 미리보기 위에 폰트·색상·흐름 속도 컨트롤이 놓인 화면
편집기: 폰트·색상·모션·효과를 라이브 미리보기 위에서 조절.
Glowboard 멀티폰 사인 — 네 대의 휴대폰이 한 단어를 한 글자씩 나눠 표시하는 모습
멀티폰 사인은 한 단어를 친구들의 휴대폰에 나눠 띄웁니다.

공연을 위한 응원봉과 비트 싱크

응원봉 모드로 바꾸면 화면 전체가 하나의 색으로 빛나며 단색·펄스·스트로브·무지개 효과를 냅니다. 사람들에 부딪혀도 꺼지지 않도록 터치 잠금이 함께 있습니다. 비트 싱크는 한 발 더 나아가, 마이크로 음악을 들어 불빛이 박자에 맞춰 반응합니다. 텍스트 펄스, 색상 플래시, 12칸 이퀄라이저의 세 가지 모드와 낮음·보통·높음 감도로 조용한 장소부터 꽉 찬 경기장까지 대응합니다. 소리는 비트 싱크가 켜져 있는 동안 이 휴대폰에서만 분석되며, 녹음되거나 어디에도 전송되지 않습니다.

여러 대의 휴대폰이 하나의 사인으로

멀티폰 사인은 여럿을 하나의 배너로 묶어 줍니다. 한 사람이 짧은 메시지를 입력하면 Glowboard가 한 글자씩(최대 12대) 나누고, QR 코드로 스타일을 공유합니다. 친구들이 "참여"를 탭해 스캔하고 자기 위치를 고르면 됩니다. 이후 불빛 웨이브가 모든 휴대폰을 가로질러 흐르는데, 각 휴대폰의 시계를 사용해 다음 정각에 함께 시작하므로 인터넷 없이도 타이밍이 맞습니다.

콘서트뿐 아니라 일상의 사인까지

휴대폰을 스크롤 LED 사인으로 만드는 법

  1. 홈 탭의 빠른 입력창에 메시지를 적거나, 템플릿에서 시작합니다.
  2. 편집기를 열어 폰트·색상·흐름 속도(1 읽기 쉽게 ~ 10 경기장 빠르게)를 고릅니다.
  3. LED 스티커를 더하거나 글로우·무지개·LED 도트 격자를 켭니다.
  4. 전체 화면으로 재생을 탭하면 밝기가 100%가 되고 화면이 꺼지지 않습니다.
  5. 그대로 들어 올리거나, 내 배너에 저장해 한 번의 탭으로 다시 재생합니다.

첫 사인을 켜기 전에 알아 두면 좋은 점

비트 싱크는 마이크 권한이, 멀티폰 참여는 QR 코드를 스캔하기 위한 카메라가 필요합니다. 둘 다 선택 사항이며 해당 기능에서만 사용됩니다. Glowboard는 계정 없이 완전 오프라인으로 작동하고, 광고와 선택형 PRO 폰트 체험에만 연결이 필요합니다. 광고와 함께 무료로 쓸 수 있으며, 선택형 PRO(평생 또는 연간)로 광고 제거와 추가 폰트, 무지개·그러데이션·GIF 효과, PRO 스티커, 무제한 배너 저장을 잠금 해제할 수 있습니다.

자주 묻는 질문

Glowboard는 오프라인에서도 되나요?

네. 배너, 응원봉, 멀티폰, 카운트다운, 내보내기 기능 모두 계정 없이 기기에서 작동하며, 광고와 PRO 폰트 체험에만 연결이 필요합니다.

여러 대의 휴대폰으로 하나의 사인을 만들 수 있나요?

네. 멀티폰 사인은 QR 코드로 스타일을 공유하고 한 단어를 한 글자씩 최대 12대로 나누며, 각 휴대폰의 시계를 사용해 다음 정각에 웨이브가 함께 시작됩니다.

비트 싱크는 소리를 녹음하나요?

아니요. 마이크는 비트 싱크가 켜져 있는 동안 기기 안에서만 분석되며, 녹음되거나 어디에도 전송되지 않습니다.

Glowboard는 무료인가요?

네, 광고와 함께 무료입니다. 선택형 PRO(평생 또는 연간)로 광고를 없애고 추가 폰트, 효과, GIF 내보내기, 무제한 배너 저장을 이용할 수 있습니다.

Google Play에서 Glowboard 받기 →

Glowboard: an LED banner scroller that turns your phone into a sign

Glowboard app icon By the NAXTECH team · Published 17 May 2026 · Updated 23 Aug 2026 · Hands-on with v1.0
Glowboard LED banner scroller showing a bright amber scrolling message on an Android phone held above a crowd
Glowboard turns an ordinary Android phone into a scrolling LED sign for concerts, pickups and parties.

Glowboard at a glance

What it is
An LED banner scroller that turns your phone screen into a glowing sign.
Platform
Android · works fully offline, no account needed.
Price
Free, with ads and an optional Pro upgrade (lifetime or yearly).
Core modes
Scrolling banner · Light stick · Beat sync · Multi-phone sign · Airport pickup · Countdown & clock.
Fonts
20 display faces across Latin, Thai, Japanese, Korean and Chinese scripts.
Best for
Concerts, K-pop fan chants, airport pickups, game day and parties.

You are three rows from the stage, the lights drop, and you want the whole section to see the two words you have been saving all week — but all you are holding is a phone. That gap between a phone screen and a real light-up sign is exactly what Glowboard was built to close.

Glowboard is an LED banner scroller: you type a message, pick a look, and your screen becomes a bright, glowing sign that reads clearly from the back row or across an arrivals hall. Everything runs on the device, with no account and no connection required, so your sign is ready the moment the moment arrives.

A banner editor built like a real LED panel

Type any message and Glowboard renders it on an LED dot grid with a per-letter glow, just like a hardware sign. Choose from 20 display fonts — dot matrix, pixel, arcade, heavy block and a Pro neon tube — grouped by script so Thai, Japanese, Korean and Chinese messages get the right face automatically. Set the scroll direction (left, right, up or still), dial the speed from 1 (easy to read) to 10 (stadium fast), and layer on blink, mirror text for a car windshield, outline, drop shadow, a rainbow cycle or one of the gradient fills. There are eight text colours, eight backgrounds, eight gradients, 12 glowing LED stickers and 18 symbols to drop straight into the message.

Glowboard editor with font, colour and scroll-speed controls over a live LED banner preview
The editor: font, colour, motion and effects over a live preview.
Glowboard multi-phone sign showing four phones each displaying one letter of a shared word
A multi-phone sign spreads one word across friends' phones.

Light stick and beat sync for the show

Switch to Light stick and the whole screen becomes one colour with a solid, pulse, strobe or rainbow effect — a touch lock keeps it from turning off when the crowd jostles you. Beat sync goes further: it listens through the microphone and makes the lights react to the music in three modes — text pulse, colour flash and a 12-bar equalizer — with low, medium and high sensitivity for a quiet room or a full stadium. The audio is analysed on the device only while beat sync is open; nothing is ever recorded or uploaded.

One sign across many phones

The multi-phone sign turns a group into a single banner. One person types a short message, Glowboard splits it one letter per phone (up to 12), and a QR code shares the style — friends tap Join, scan, and pick their position. A light wave then runs across all the phones in sync, timed to start on the next minute using each phone's own clock, so no internet is needed to line it up.

Everyday signs, not just concerts

How to turn your phone into a scrolling LED sign

  1. Type your message in the quick box on the Home tab, or start from a template.
  2. Open the editor to choose a font, colour and scroll speed (1 easy-read to 10 stadium-fast).
  3. Add LED stickers or switch on glow, rainbow or the LED dot grid.
  4. Tap Play full-screen — brightness jumps to 100% and the screen stays awake.
  5. Lift it up, or save it to My Banners to replay in a single tap.

Good to know before your first sign

Beat sync needs microphone access and the multi-phone join uses the camera to scan a QR code; both are optional and used only for those features. Glowboard works fully offline with no account — only ads and the optional Pro font trial use a connection. It is free with ads, and an optional Pro upgrade (lifetime or yearly) removes ads and unlocks extra fonts, rainbow, gradient and GIF effects, Pro stickers and unlimited saved banners.

Frequently asked questions

Does Glowboard work offline?

Yes. The banner, light stick, multi-phone, countdown and export features all run on your device with no account; only ads and the Pro font trial need a connection.

Can several phones make one sign together?

Yes. The multi-phone sign shares a style by QR code and splits a word one letter per phone, up to 12, with a light wave that syncs on the next minute using each phone's clock.

Does beat sync record audio?

No. The microphone is analysed on-device only while beat sync is open, and nothing is recorded or uploaded.

Is Glowboard free?

Yes, it is free with ads. An optional Pro upgrade (lifetime or yearly) removes ads and unlocks extra fonts, effects, GIF export and unlimited saved banners.

Get Glowboard on Google Play →